Vous pouvez obtenir un devis dans les 24 heures pour toutes vos demandes.Il vous suffit d'envoyer un email à info@adamsint.net ou de remplir le formulaire ci-dessous.
Contactez nous
ATEX FLANGE HEATER 260kW 480V 3PH - VULCANIC France
Description: 260kW 480V 3Ph Flange Heater according to GA Drawing No. 6046605 Rev00:
- ATEX certified, II 2 G Ex de IIC T1 Gb
- 54 removable Heating cartridges Ø16 mm installed in stainless steel pockets.
- 10" 600# RF Flange in painted carbon steel
- Terminal box IP66, Ex "d+e" type for power and control
- 2 x K-type thermocouple fitted on pin for element over temperature control.
Items delivered with one gasket.
Special conditions must be taken to allow the safe use of this equipment. Refer to the instructions manual.
Requirements for a safe use :
- The safety device monitoring the surface temperature of the heating elements must avoid the overheating of the
external parts of the equipment in contact with the hazardous atmosphere, and must switch off the power supply
according to a wiring diagram with positive safety (a manual reset is necessary). If necessary, a forced cooler must be
installed to prevent this overshoot (pressurized air, blower...).
- To heat gas in vacuum conditions is prohibited.
- Precautions must be taken so that the heating part is never in contact with an explosive mixture. When a non-inert gas
is heated, a gas analyzer should be installed, which switch off the power supply according to a wiring diagram with
positive safety (a manual reset is necessary).
- The maximum temperature of the gas to be heated and the set point of the safety devices must comply with the data
of the instructions manual. Immersion heaters are designed, manufactured and tested to fulfil the main safety
requirements of the PED 2014/68/EU (appendix I).
Consequently, they can be installed on a pressure vessel subjected to the PED, until the risk of category IV, within the applicable limits
PS, max TS and min TS.
VEUILLEZ NOUS CONTACTER POUR COMMANDER POUR OBTENIR LE MEILLEUR PRIX ET LIVRAISON POUR VULCANICMARQUÉ ATEX FLANGE HEATER 260kW 480V 3PH VOUS POUVEZ AUSSI DEMANDER D'AUTRES NUMÉROS DE PIÈCES. NOUS POUVONS OFFRIR LE MEILLEUR PRIX ET LA LIVRAISON AVEC UN LARGE RÉSEAU DE DISTRIBUTION DE PRODUITS EN USA ET DANS LE MONDE SUR LE MARCHÉ DES PRODUITS INDUSTRIELS.
Télécharger CATALOGUE DE PRODUITS DE VULCANIC
Formulaire de demande
Vous pouvez nous contacter en utilisant le formulaire ci-dessous ou envoyer directement du courrier à:
TAGS
VULCANIC
ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH
Sales ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventes
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH prix
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Prix de vente
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventes
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Prix de vente
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Etats-Unis
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventes aux États-Unis
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Prix de vente aux États-Unis
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Prix au Royaume-Uni
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Ventes au Royaume-Uni
VULCANIC ATEX FLANGE HEATER 260kW 480V 3PH Prix de vente au Royaume-Uni